- Minimum Power
- 950.0 bhp
- Maximum Power
- 1350.0 bhp
- Emissions
- U.S. EPA Tier 2 Equivalent
- Rated Speed
- 1800-2100 rpm
The Cat® C32 Industrial Diesel Engine is offered in ratings ranging from 708-1007 bkW (950-1350 bhp) @ 1800-2100 rpm. These ratings meet U.S. EPA Tier 2 equivalent emission standards. Industries and applications powered by these high power engines include Bore/Drill Rigs, Chippers/Grinders, Construction, Cranes, Dredgers, Forestry, Hydraulic Power Units, General Industrial, Irrigation Equipment, Material Handling, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.
Product Specs
-
Power Rating
- Minimum Power
- 950.0bhp
- Maximum Power
- 1350.0bhp
- Rated Speed
- 1800-2100 rpm
- Minimum Power
- 950BHP
- Maximum Power
- 1350BHP
- Rated Speed
- 1800-2100 rpm
- Maximum Power
- 1350HP
- Maximum Torque
- 4548lb-ft @ 1400 rpm
- Rated Speed
- 1800-2100 rpm
- Minimum Power
- 950HP
-
Emission Standards
- Emissions
- U.S. EPA Tier 2 Equivalent
- Emissions
- U.S. EPA Tier 2 Equivalent
- Emissions
- U.S. EPA Tier 2 Equivalent
-
General
- Engine Configuration
- V-12, 4-Stroke-Cycle Diesel
- Bore
- 145 mm (5.71 in)
- Stroke
- 162 mm (6.38 in)
- Displacement
- 32.1 L (1958.9 in³)
- Aspiration
- Turbocharged Aftercooled (TA)
- Compression Ratio
- 16.5:1
- Combustion System
- Direct Injection
- Rotation (from flywheel end)
- Counterclockwise
- Engine Configuration
- V-12, 4-Stroke-Cycle Diesel
- Bore
- 5.7in
- Stroke
- 6.4in
- Displacement
- 1958.9in³
- Compression Ratio
- 16.5:1
- Aspiration
- Turbocharged Aftercooled (TA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Engine Configuration
- V-12, 4-Stroke-Cycle Diesel
- Bore
- 145 mm (5.71 in)
- Stroke
- 162 mm (6.38 in)
- Aspiration
- Turbocharged Aftercooled (TA)
- Displacement
- 32.1 L (1958.9 in³)
- Compression Ratio
- 16.5:1
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
-
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
- Length
- 1917 mm (75.5 in)
- Width
- 1479 mm (58.2 in)
- Height
- 1319 mm (51.9 in)
- Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
- 2946 kg (6495 lb)
-
Engine Dimensions - Approximate
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 6495lb
- Length
- 75.5in
- Width
- 58.2in
- Height
- 51.9in
- Height
- 1319 mm (51.9 in)
- Length
- 1917 mm (75.5 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 2946 kg (6495 lb)
- Width
- 1479 mm (58.2 in)
Equipment
-
- Air Inlet System
-
- Twin Turbocharged Aftercooled
- Air-to-Air Aftercooled
-
- Control System
-
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
-
- Cooling System
-
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
-
- Exhaust System
-
- Exhaust manifold, dry
- Optional exhaust outlet
-
- Flywheels And Flywheel Housing
-
- SAE No. 1 flywheel housing
-
- Fuel System
-
- MEUI injection
- Fuel filter, secondary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
-
- Lube System
-
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
-
- General
-
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request