Cat Wheel Loaders:

930M Ag Handler

Operating Weight
31876 lb
Bucket Capacities
3.1-5.0 m3 (4.0-6.5 yd3)
Maximum Gross Power – Maximum Engine Speed (Standard Power Mode; Speed Range 1-3*)
1600 rpm
Maximum Gross Power – ISO 14396 (Standard Power Mode; Speed Range 1-3*)
160 hp


Product Specs

  • Weights

  • Operating Weight
    31876lb
  • Buckets

  • Bucket Capacities
    3.1-5.0 m3 (4.0-6.5 yd3)
    Bucket Capacities – Light Material
    3.1-5.0 m3 (4.0-6.5 yd3)
  • Engine

  • Maximum Gross Power – Maximum Engine Speed (Standard Power Mode; Speed Range 1-3*)
    1600rpm
    Maximum Gross Power – ISO 14396 (Standard Power Mode; Speed Range 1-3*)
    160hp
    Maximum Gross Power – ISO 14396 (DIN) (Standard Power Mode; Speed Range 1-3*)
    162hp
    Rated Net Power at 1,600 rpm – SAE J1349 (Standard Power Mode; Speed Range 1-3*)
    154hp
    Rated Net Power at 1,600 rpm – SAE J1349 at Maximum Fan Speed (Standard Power Mode; Speed Range 1-3*)
    141hp
    Engine Model
    Cat C7.1 ACERT
    Rated Net Power at 1,600 rpm – ISO 9249 (DIN) (Standard Power Mode; Speed Range 1-3*)
    158hp
    Emissions
    Engine meets Tier 4 Final emission standards.
    Note
    Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner and diesel exhaust filter.
    Maximum Gross Power
    164hp
    Note
    Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test) and U.S. Forestry Service SAE J350.
    Note
    *Range 4 power is boosted to be the same as Performance Mode.
    Maximum Gross Torque – ISO 14396 (Standard Power Mode; Speed Range 1-3*)
    592lbf-ft
    Maximum Net Torque – SAE J1349 (Standard Power Mode; Speed Range 1-3*)
    566lbf-ft
    Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode; Speed Range 1-3*)
    572lbf-ft
    Displacement (Standard Power Mode; Speed Range 1-3*)
    427in3
    Maximum Gross Power – Maximum Engine Speed (Performance Power Mode; Speed Range 1-4)
    1800rpm
    Maximum Gross Power – ISO 14396 (Performance Power Mode; Speed Range 1-4)
    164hp
    Maximum Gross Power – ISO 14396 (DIN) (Performance Power Mode; Speed Range 1-4)
    166hp
    Rated Net Power at 1,800 rpm – SAE J1349 (Performance Power Mode; Speed Range 1-4)
    157hp
    Rated Net Power at 1,800 rpm – SAE J1349 at Maximum Fan Speed (Performance Power Mode; Speed Range 1-4)
    143hp
    Rated Net Power at 1,800 rpm – ISO 9249 (DIN) (Performance Power Mode; Speed Range 1-4)
    162hp
    Maximum Gross Torque – ISO 14396 (Performance Power Mode; Speed Range 1-4)
    592lbf-ft
    Maximum Net Torque – SAE J1349 (Performance Power Mode; Speed Range 1-4)
    566lbf-ft
    Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode; Speed Range 1-4)
    572lbf-ft
    Displacement (Performance Power Mode; Speed Range 1-4)
    427in3
  • Steering

  • Steering Articulation Angle (each direction)
    40°
    Steering Cycle Times (full left to full right): At 1,800 rpm: 90 rpm steering wheel speed
    2.4seconds
    Number of Steering Wheel Turns – full left to full right or full right to full left
    3.5turns
    Maximum Flow – Steering Pump
    34gal/min
    Maximum Working Pressure – Steering Pump
    3500psi
    Maximum Steering Torque: 0 degrees (straight machine)
    37155lbf-ft
    Maximum Steering Torque: 40 degrees (full turn)
    27747lbf-ft
  • Loader Hydraulic System

  • Maximum Flow – Implement Pump
    50gal/min
    Maximum Flow – Implement Pump: 3rd Function Maximum Flow*
    50gal/min
    Maximum Flow – Implement Pump: 4th Function Maximum Flow*
    42gal/min
    Maximum Working Pressure – Implement Pump
    4061psi
    Relief Pressure – Tilt Cylinder
    4351psi
    Relief Pressure – Tilt Cylinder: 3rd Function Maximum Working Pressure
    4061psi
    Relief Pressure – Tilt Cylinder: 4th Function Maximum Working Pressure
    4061psi
    Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Raise (ground level to maximum lift)
    4.8seconds
    Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Dump (at maximum lift height)
    1.6seconds
    Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Float Down (maximum lift to ground level)
    1.8seconds
    Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Total Cycle Time
    8.2seconds
    Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Raise (ground level to maximum lift)
    4.3seconds
    Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Dump (at maximum lift height)
    1.4seconds
    Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Float Down (maximum lift to ground level)
    1.8seconds
    Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Total Cycle Time
    7.5seconds
    Note
    *Adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
  • Service Refill Capacities

  • Fuel Tank
    51.5gal
    Cooling System
    7.9gal
    Engine Crankcase
    5.3gal
    Transmission (gearbox)
    2.2gal
    Axles: Front
    6.9gal
    Axles: Rear
    6.6gal
    Hydraulic System (including tank)
    43.6gal
    Hydraulic Tank
    23.8gal
    Diesel Exhaust Fluid (DEF) Tank
    5gal
    Note
    DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
  • Transmission

  • Forward and Reverse: Range 1*
    1-13 km/h (0.6-8 mph)
    Forward and Reverse: Range 2
    8mph
    Forward and Reverse: Range 3
    17mph
    Forward and Reverse: Range 4
    25mph
    Note
    *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
  • Cab

  • ROPS
    ISO 3471:2008
    FOPS
    ISO 3449:2005 Level II
    Note
    The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A)
    Note
    *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
  • Tires

  • Standard Size
    20.5 R25, radial (L-3)
    Other Choices Include:
    20.5 R25, radial (L-2); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3)
    Note
    Other tire choices are available. Contact your Cat dealer for details.
    Note
    In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
    Note
    Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
  • Axles

  • Front
    Fixed; Locking differential (standard)
    Rear
    Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
  • Dimensions and Operating Specifications (Approximate) – 3.1 m³ (4.1 yd³) Bucket

  • Height: Ground to Cab**
    10.92ft
    Height: Ground to Beacon**
    12.08ft
    Height: Ground Axle Center**
    2.17ft
    Height: Ground Clearance**
    1.25ft
    Length: Overall*
    27.25ft
    Length: Rear Axle to Bumper
    6.50ft
    Length: Hitch to Front Axle
    4.92ft
    Length: Wheel Base
    9.83ft
    Clearance: Bucket at 45 degrees*
    10.42ft
    Clearance: Loadover Height**
    11.58ft
    Clearance: Level Bucket**
    13.33ft
    Height: Bucket Pin**
    14.42ft
    Height: Overall**
    18.67ft
    Reach: Bucket at 45 degrees*
    4.42ft
    Carry Height: Bucket Pin
    2.00ft
    Dig Depth**
    5.3in
    Width: Bucket
    9.00ft
    Width: Tread Center
    6.25ft
    Turning Radius: Over Bucket
    20.92ft
    Width: Over Tires
    8.33ft
    Turning Radius: Outside of Tires
    17.67ft
    Turning Radius: Inside of Tires
    9.33ft
    Rack Angle at Full Lift
    51 degrees
    Dump Angle at Full Lift
    44 degrees
    Rack Angle at Carry
    48 degrees
    Departure Angle
    33 degrees
    Articulation Angle
    40 degrees
    Tipping Load – Straight (ISO 14397-1)*
    16430lb
    Tipping Load – Full Turn (ISO 14397-1)*
    13934lb
    Breakout*
    18808lb
    Operating Weight*
    31876lb
    Note
    *Vary with bucket.
    Note
    **Vary with tire.
    Note
    Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
  • Dimensions and Operating Specifications (Approximate) – 3.5 m³ (4.6 yd³) Bucket

  • Height: Ground to Cab**
    10.92ft
    Height: Ground to Beacon**
    12.08ft
    Height: Ground Axle Center**
    2.17ft
    Height: Ground Clearance**
    1.25ft
    Length: Overall*
    27.58ft
    Length: Rear Axle to Bumper
    6.50ft
    Length: Hitch to Front Axle
    4.92ft
    Length: Wheel Base
    9.83ft
    Clearance: Bucket at 45 degrees*
    10.17ft
    Clearance: Loadover Height**
    11.58ft
    Clearance: Level Bucket**
    13.33ft
    Height: Bucket Pin**
    14.42ft
    Height: Overall**
    19.00ft
    Reach: Bucket at 45 degrees*
    4.67ft
    Carry Height: Bucket Pin
    2.00ft
    Dig Depth**
    5.3in
    Width: Bucket
    9.00ft
    Width: Tread Center
    6.25ft
    Turning Radius: Over Bucket
    21.92ft
    Width: Over Tires
    8.33ft
    Turning Radius: Outside of Tires
    17.67ft
    Turning Radius: Inside of Tires
    9.33ft
    Rack Angle at Full Lift
    51 degrees
    Dump Angle at Full Lift
    44 degrees
    Rack Angle at Carry
    48 degrees
    Departure Angle
    33 degrees
    Articulation Angle
    40 degrees
    Tipping Load – Straight (ISO 14397-1)*
    16070lb
    Tipping Load – Full Turn (ISO 14397-1)*
    13592lb
    Breakout*
    17246lb
    Operating Weight*
    32136lb
    Note
    *Vary with bucket.
    Note
    **Vary with tire.
    Note
    Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.

Equipment

  • Power Train
    • Auto idle shut down feature
    • Cat C7.1 ACERT engine
      • Power modes (Standard and Performance)
      • Power by range (High Power in Range 4)
      • Turbocharged and aftercooled
      • Filtered crankcase breather
      • Diesel particulate filter
      • Selective Catalyst Reduction
    • Coded start (requires secondary display)
    • Coolant protection to –34° C (–29° F)
    • Enclosed wet disc full hydraulic brakes
    • Fuel priming pump, automatic
    • Hydraulically driven demand cooling fan
    • Hydrostatic transmission with electronic control
      • Operator modes (Default, TC, Hystat, and Ice)
      • Directional Shift Aggressiveness (fast, medium, slow)
      • Rimpull control, adjust wheel torque
      • Creeper control, adjust ground speed
    • Locking differential front axle – on the go engagement with “Always ON” feature
    • Parking brake, electric
    • Single plane cooling package wide six fins per inch density
    • Throttle lock and max speed limiter
  • Hydraulics
    • Automatic lift and bucket kickouts, adjustable in-cab
    • Bucket and fork modes, adjustable in-cab
    • Cylinder damping at kickout and mechanical end stops
    • Fine mode control (fast, medium, slow) in fork mode
    • Hydraulic response setting (fast, medium, slow)
    • Hydraulic diagnostic connectors and S·O·SSM ports
    • Load sensing hydraulics and steering
  • Electrical
    • Alternator, 115 amp, heavy duty
    • 12V power supply in cab (2)
    • Batteries, 1,000 CCA (2) 24V system, disconnect switch
    • Back-up alarm
    • Debris package (reversing fan)
    • Emergency shutdown switch
    • Halogen work and roading lights, LED rear tail lights
    • Product Link PRO
    • Remote jump start post
    • Resettable main and critical function breakers
  • Operator Environment
    • 75 mm (3 in) retractable seat belt, with audible alarm and indicator
    • Automatic temperature control
    • External heated mirrors with lower parabolic
    • Hydraulic control lockout
    • Interior cab lighting, door and dome
    • Interior rearview mirrors (2)
    • Lunch box storage
    • Radio ready speakers
    • Rear window defrost, electric
    • Seat-mounted electronic implement controls, adjustable
    • Column mounted multi function control – lights, wipers, turn signal
    • Tilt and telescopic steering wheel
    • Tinted front glass
    • Wet arm wiper/washer, 2-speed and intermittent, front
  • Other Standard Equipment
    • High Lift linkage
    • Large-access enclosure doors with adjustable close/open force
    • Parallel Lift loader linkage
  • Optional Equipment
    • Auto lube, integrated in secondary display
    • Auxiliary flow, third and fourth function, adjustable through secondary display
    • Auxiliary tool box
    • Beacon light, strobe
    • Cab, deluxe
      • Electrically adjustable external heated mirrors (2)
      • Secondary touch screen display to enable features and adjust parameters
      • Sunscreen, front and rear
      • Windshield washing access steps
    • Camera, rearview
    • Cat Production Measurement weigh scale system integrated into secondary display
    • Cold start package
    • Coupler, (Fusion and ISO 23727)
    • Fenders (extended cover and full coverage)
    • Guarding (machine and operator)
    • Guarding (power train and light)
    • Lights, auxiliary, halogen or LED with engine compartment lights
    • Limited slip rear axle
    • Object Detection
    • Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
    • Radio packages
    • Ride Control System, adjustable through secondary display
    • Seats
      • Deluxe seat – fully adjustable fabric air suspension seat with mid backrest and mechanical lumbar support
      • Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
    • Steering
      • Dual mode and secondary
    • Tire Pressure Monitoring (TPM) integrated into secondary display

Request a Quote

Please leave this field empty.

Find a Whayne CAT
Location or Rep Near You