Cat Medium Wheel Loaders:

962M Wheel Loader

Net Power - ISO 9249
250 hp
Operating Weight
44591 lb
Bucket Capacities
2.5-9.2 m³ (3.3-12.0 yd³)
Engine Model
Cat C7.1 ACERT

The new 962M Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. Meets U.S. EPA Tier 4 Final and EU Stage IV emission standards.



Product Specs

  • Engine

  • Net Power - ISO 9249
    250hp
    Engine Model
    Cat C7.1 ACERT
    Peak Gross Torque (1,350 rpm) – SAE J1995
    921lbf-ft
    Peak Gross Torque (1,350 rpm) – ISO 14396
    918lbf-ft
    Displacement
    428in3
    Maximum Power @ 2,100 rpm – SAE J1995
    271hp
    Maximum Power @ 2,100 rpm – ISO 14396
    269hp
    Maximum Power @ 2,100 rpm – ISO 14396 (metric)
    273hp
    Maximum Net Power @ 2,100 rpm – SAE J1349
    250hp
    Maximum Net Power @ 2,100 rpm – ISO 9249
    250hp
    Maximum Net Power @ 2,100 rpm – ISO 9249 (metric)
    253hp
    Maximum Net Torque (1,350 rpm)
    865lbf-ft
  • Weights

  • Operating Weight
    44591lb
    Note
    Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, manual diff lock/open axles (front/rear), power train guard, secondary steering,
  • Buckets

  • Bucket Capacities
    2.5-9.2 m³ (3.3-12.0 yd³)
  • Transmission

  • Forward 1
    4.3mph
    Forward 2
    7.5mph
    Forward 3
    12.0mph
    Forward 4
    16.0mph
    Reverse 1
    4.3mph
    Reverse 2
    7.5mph
    Reverse 3
    16.0mph
    Forward 5
    24.5mph
    Note
    Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
  • Service Refill Capacities

  • Cooling System
    15.6gal
    Crankcase
    5.8gal
    Transmission
    11.4gal
    Differentials and Final Drives – Front
    11.4gal
    Differentials and Final Drives – Rear
    11.4gal
    Hydraulic Tank
    33.0gal
    DEF Tank
    4.2gal
    Fuel Tank
    72.6gal
  • Operating Specifications

  • Breakout Force
    42489lbf
    Static Tipping Load – Full 40° Turn – with Tire Deflection
    25814lb
    Static Tipping Load – Full 40° Turn – No Tire Deflection
    27494lb
    Note
    For a machine configuration as defined under “Weight.”
    Note
    Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
  • Hydraulic System

  • Hydraulic Cycle Time – Total
    8.9Seconds
    Implement Pump Type
    Variable Axial Piston
    Implement System: Maximum Pump Output (2,150 rpm)
    76gal/min
    Implement System: Maximum Operating Pressure
    4250psi
  • Sound

  • With Cooling Fan Speed at Maximum Value: Operator Sound Pressure Level (ISO 6396:2008)
    70dB(A)
    With Cooling Fan Speed at Maximum Value: Exterior Sound Power Level (ISO 6395:2008)
    107dB(A)
    With Cooling Fan Speed at Maximum Value: Exterior Sound Pressure Level (SAE J88:2013)
    75 dB(A)*
    Note
    *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
    With Cooling Fan Speed at 70% of Maximum Value**: Operator Sound Pressure Level (ISO 6396:2008)
    69dB(A)
    With Cooling Fan Speed at 70% of Maximum Value**: Exterior Sound Power Level (ISO 6395:2008)
    104 LWA***
    Note
    **For machines in European Union countries and in countries that adopt the “EU Directives.”
    Note
    ***European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
  • Bucket Capacities

  • Bucket Range
    2.5-9.2 m³ (3.3-12.0 yd³)
  • Dimensions – Standard Lift

  • Height to Top of Hood
    8.83ft
    Height to Top of Exhaust Pipe
    11.17ft
    Height to Top of ROPS
    11.33ft
    Ground Clearance
    1.17ft
    Center Line of Rear Axle to Edge of Counterweight
    7.08ft
    Center Line of Rear Axle to Hitch
    5.50ft
    Wheelbase
    11.00ft
    Overall Length (without bucket)
    23.75ft
    Hinge Pin Height at Carry Height
    2.17ft
    Hinge Pin Height at Maximum Lift
    13.92ft
    Lift Arm Clearance at Maximum Lift
    11.33ft
    Rack Back at Maximum Lift
    59 degrees
    Rack Back at Carry Height
    49 degrees
    Rack Back at Ground
    37 degrees
    Maximum Width over Tires (loaded)
    9.25ft
    Tread Width
    7.00ft
    Note
    All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
  • Dimensions – High Lift

  • Height to Top of Hood
    8.83ft
    Height to Top of Exhaust Pipe
    11.17ft
    Height to Top of ROPS
    11.33ft
    Ground Clearance
    1.17ft
    Center Line of Rear Axle to Edge of Counterweight
    7.08ft
    Center Line of Rear Axle to Hitch
    5.50ft
    Wheelbase
    11.00ft
    Overall Length (without bucket)
    23.75ft
    Hinge Pin Height at Carry Height
    2.58ft
    Hinge Pin Height at Maximum Lift
    14.83ft
    Lift Arm Clearance at Maximum Lift
    11.83ft
    Rack Back at Maximum Lift
    59 degrees
    Rack Back at Carry Height
    49 degrees
    Rack Back at Ground
    37 degrees
    Maximum Width over Tires (loaded)
    9.25ft
    Tread Width
    7.00ft
    Note
    All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

Request a Quote

Please leave this field empty.

Find a Whayne CAT
Location or Rep Near You